SENSe Subsystem 8
U8480 Series Programming Guide 231
Parameters
[a] The following measurement units can be used:
—Hz
—kHz (10
3
)
—MHz (10
6
)
—GHz (10
9
)
Example
Reset condition
On reset, the value is set to 50 MHz.
Item Description/Default Range of values
numeric_value
A numeric value for the stop frequency:
– DEF: the default value is 50 MHz
– MIN: 0 Hz
– MAX: 1000.0 GHz
The default unit is Hz.
0 Hz to 1000.0 GHz
[a]
DEF
MIN
MAX
FREQ:STOP 10MHz Sets the frequency sweep to stop at 10 MHz.
To Next Page
Loading...