Korg Oasys - Page 144

Sampling (Open Sampling System)
136
Whenthepowerisfirstturnedon,theassigned
samplewillbesetto“Orig.KeyC2.
2. Makethefollowingsettings.
–INPUT1–
BusSelect(IFX/Indiv.):Off
TurnofftheinputfromtheINPUT1–4andS/P DIF
L/Rjacks.
–SamplingSetup–
SourceBus:L/R
ThesoundsenttotheL/Rwill
besampled.
Trigger:SamplingSTARTSW
Afteryou’vepressedtheSAMPLINGRECswitch
toentersampling‐readymode,resamplingwill
beginwhenyoupresstheSAMPLING
START/STOPswitch.
Resample:Auto
Thesampleassignedtotheindexwillberesampled
automatically.
Key:C2
UseKeytospecifythesamplethatwillbe
resampled.
RecordingLevel:0.0
Thisisthedefaultsettingforresampling.
Saveto:RAM
ThedatawillbewrittentoRAMmemory.
SamplingMode:Stereo
ThesoundoftheinternalL/Rchannelswillbe
sampledinstereo.
Auto+12dBOn:On
The+12dBsettingwillautomaticallybeturnedon
forthesamplesyourecord.
Be
awarethatifyouchangetheBussettingfromOff
toL/RorIFX1–12,thevolumelevelsenttothe
AUDIOOUTL/MONOandRjacksandthe
headphonesmayriseexcessively.
3. InP2:LoopEdit,checkthe+12dBsetting.
4. IntheP8:InsertEffect–Routingpage,setBus
Select
toIFX1.
5. IntheP8:InsertEffect,InsertFXpage,setIFX1to
101:ReverbHall,andturnIFXOn/OffON.