Korg Oasys - Page 213

Overview - What is KARMA? Performing with KARMA
205
Theslidersandswitcheswillcontrolthepatternor
phrasegeneratedbytheKARMAmoduleselected
bytheMODULECONTROLswitch.Ifyou’ve
selectedMASTER,you’llbeabletocontrolthe
moduleon/offstatusandvarythepatternsand
phrasesgeneratedbyalloftheKARMAmodules.
Youcanalsooperate
theslidersandswitchesinthe
displayorusingtheVALUEcontroller,justasin
Programmode.
TheKARMAmoduleandthetypeorvalueofthe
parameterbeingcontrolledbytheslidersand
switchesisshownintheKARMAModuleInfo
“KARMAValue”field.Thisletsyouseethe
KARMA
moduleandparametersthatarebeing
affectedbyyoursliderorswitchoperations.
4. UsethefrontpanelSCENE1–8switchestochoose
ascene.
ThischangesthescenefortheKARMAmodule(s)
selectedbytheMODULECONTROLswitch.
IfMODULECONTROLissettoMASTER,each
KARMAmodulewillchangetothe
scenethatis
savedasthemastersetting.
Eachoftheeightscenescontainsthevaluesof
sliders1–8andswitches1–8.BypressingaSCENE
1–8switchtochooseascene,youcaninstantlyrecall
settingsfortheeightslidersandeightswitches.
Evenifyouswitchscenes,thechangesyoumake
usingsliders1–8andswitches1–8areremembered
untilyouselectanothercombination.Whenyou
writeacombination,yoursliderandswitchsettings
aresavedintherespectivescene1–8.
Name display for the KARMA CONTROLS 1–8
sliders and KARMA SWITCHES 1–8
JustasintheequivalentpageofProgrammode,the
CombinationP0:Play–KARMAGEpagedisplaysthe
slidersandswitchesassignedtothecombination,and
theirnames.
Inthecombination,thenameshowninsquarebrackets
[]isthecategoryoftheprogramselectedforthe
timbrebeingcontrolledby
theKARMACONTROLS
1–8slidersandKARMASWITCHES.Thistellsyouthe
timbrewhosephraseisbeingcontrolledbythe
KARMACONTROLS1–8slidersandKARMA
SWITCHES.
Ifmultipletimbresarebeingcontrolled
simultaneously,thiswillindicate[MLTI].
KARMA module “Run” and “Solo” settings
InCombinationmode,uptofourKARMAmodules
canbeoperatingsimultaneously.
IftheKARMAfunctionisoff,allKARMAmodules
willbestopped.IftheKARMAfunctionison,the
KARMAmodule(s)youspecifyherewilloperate.
1. AccesstheCombinationP7:KARMA–GE
Setup/KeyZonespage.
2. Usethe“Run”and“Solo”
settingstospecifythe
module(s)thatwilloperatewhenKARMAison.
KARMAmoduleswhose“Run”settingisOn
(checked)willoperate.
Ifyouturn“Solo”On(checked),onlythatKARMA
modulewillsound.Thisisusefulwhenyouare
selectingaGE,orwhenyouwanttoauditionthe
phrasethat
amoduleisgenerating.
Moduleswhose“Solo”isOn(checked)willsound
evenif“Run”isOff(unchecked).
The“Solo”settingisclearedwhenyouswitchto
anothercombination.Itisnotsavedwhenyouwrite
thecombination.
KARMAmoduleAwillsound.
KARMAmoduleBwillsound.
KARMAmodulesAandB
willsound.
Note:If“”isnotshowninthedisplay,“Run”
hasbeenassignedasaperformancerealtime
performance.TheKARMASWITCHESetc.will
control“RUN.”
KARMA module MIDI I/O channel settings
TheMIDIinput/outputchannelsettingforeach
KARMAmoduleandtheMIDIchannelsettingofeach
timbretogetherdeterminehowtheKARMAmodules
willplaythetimbres.
IfaKARMAmodule’sMIDIoutputchannelmatches
theMIDIchannelofatimbre,thephraseorpattern
generatedbythatKARMAmodule(if
it’soperating)
willplaythattimbre.Fordetailsonmakingthese
settings,see“KARMAfunctionsettingsin
Combinationmode”onpage 210and“7–1c:MIDII/O”
onpage 431oftheParameterGuide.
K
ARMA module
Parameter
Value