Korg Oasys - MIDI and Sequencer Recording Problems; Sampling and Media Issues

Overview - What is KARMA? KARMA function settings
215
commandwithIFXs,MFXs,andTFXschecked,and
MultiRECStandbychecked.Formoreinformation,
see“CopyfromCombination”onpage 584ofthe
ParameterGuide.
Contentthatiscopiedfromaprogram:
Thesamecontentwillbecopiedaswhenyou
executethe“CopyFromProgram”pagemenu
commandwithIFXs,MFXs,andTFXschecked,To:
settoMIDITrack01,withKARMAchecked,and
To:settoKARMAModuleA.
5. TheOASYSwillautomaticallyenterrecord‐ready
mode,andthemetronomewillbeginsounding
accordingtotheMetronomesetting(Sequencer0–
5c).
6. PresstheSTART/STOPswitchtobeginrealtime
recording.Whenyou’ve
finishedrecording,press
theSTART/STOPswitchonceagain.(See
“RecordingMIDIinreal‐time”onpage 91.)
Realtime recording using the KARMA
function (single-track recording)
Inthefollowingexample,we’llusetheKARMA
functiontorecordadrumpatternontrack1.
1. Selectthedesireddrumprogramfortrack1as
describedintheprocedureforrealtime‐recording
atrackandforpreparingtorecord(seep.91).
Alsomakeanyothernecessarysettingsfor
recording,suchas
setting“TrackSelect”toT01.
2. AccesstheSequencerP7:KARMA–GESetup/Key
Zonespage.
MakeMIDII/OsettingsfortheKARMAmodulesso
thatKARMAmoduleAwillplaytrack1(See
“KARMAfunctionsettingsinCombinationmode”
onpage 210).
ForKARMAmoduleA,setthe“InputChannel”
and“OutputChannel”to
01and01respectively.
SettingthemtoTchandTchwillhavethesame
result.Formoreinformation,see“7–1c:MIDII/O”
onpage 431oftheParameterGuide.
AsspecifiedbytheMIDItrack’sMIDIChannel
settingandtheKARMAmodule’sOutChannel
setting,theMIDItrackplayedbytheKARMA

moduleisdisplayedinred.
3. SelectaGEforKARMAmoduleA,andsetits
parameters.
YouarefreetoselectaGEandmakesettingsas
desired,butinthisexamplewe’llusethe“Copy
KARMAModule”pagemenucommandtocopyallof
theprogram’sKARMAfunctionsettings.Thisisan
easywaytosetupandrecordthephraseorpattern
thattheprogram’sKARMAfunctionisgenerating.
1. Usethepagemenubuttonlocatedinthetopleftof
thescreentodisplaythepagemenu,andchoose
“CopyKARMAModule.”
Specifythecopy‐sourceprogram.Turnon(check)
“GE
RTPControlSettings&Scenes”and“Perf.RTP
&PanelSettings.”PressOKtoexecutethecopy.
ThesettingsoftheKARMAREALTIME
CONTROLSsliders,switches,andsceneswillbe
copiedtoModuleControlA.
2. PresstheKARMAON/OFFswitchtoturnonthe
KARMAfunction.
Whenyouplaythekeyboard,the
KARMAfunction
willgenerateadrumpatternjustasitdidforthe
program.
3. UsetheSEQUENCERREC/WRITEswitchandthe
START/STOPswitchtorealtime‐recordontrack1.
(See“RecordingMIDIinreal‐time”onpage 91)
YoucanoperatetheKARMAREALTIME
CONTROLSsliders/switchesandtheSCENE
switcheswhilerecording,
andthechangesinthe
patternorsoundthatoccurwillberecordedjustas
theyoccur.
ThesongtempoandtheKARMAfunctiontempo
cannotbesetindependently.
4. IfyouwanttheKARMAmoduletobein
synchronizationwiththesequencerduring
recording,checkthe“QuantizeTrigger ”option.
AccesstheSequencer
P7:KARMA–Module
Parameters‐Triggerpage.