Kyocera TASKalfa 8002i - Page 1421

2WA/2NJ/2RK
7-561
Scan to FTP error code : 1105
FTP protocol is not enabled.
Scan to FTP error code : 1131
Initializing TLS has failed.
Scan to FTP error code : 1132
TLS negotiation has failed.
Scan to FTP error code : 2101
Connection to the FTP server has failed.
Step Check description Assumed cause Measures Reference
1 Checking the settings FTP protocol is not
enabled.
Correct the protocol in the
Network Settings via the
Command Center.
Step Check description Assumed cause Measures Reference
1 Checking the settings The security settings of the
device are incorrect.
Correct the settings in the
Security Settings via the
Command Center.
Step Check description Assumed cause Measures Reference
1 Checking the settings The security settings of the
device are incorrect.
Correct the settings in the
Security Settings via the
Command Center.
2 Checking the settings The FTP server settings
are incorrect.
Correct the protocol in the
Network Settings via the
Command Center.
Step Check description Assumed cause Measures Reference
1 Checking the FTP host
name
The FTP host name is
incorrect.
Correct the FTP host name
via the Command Center.
2 Checking the LAN cable The LAN cable is not con-
nected to the main unit.
Connect the LAN cable to the
main unit.
3 Checking the FTP port
number
The port number is incor-
rect.
Correct the FTP port number.
4 Checking the settings The network settings are
incorrect.
Correct the settings in the
Network Settings via the
Command Center.
5 Checking the settings The FTP server settings
are incorrect.
Correct the protocol in the
Network Settings via the
Command Center.