2WA/2NJ/2RK-1
8-57
YC13 7 DU1_B/ I DC0V/24V(pulse) Duplex motor 1 drive control signal
8 GND - - Ground
9 DU_CL_UPPER_
REM
-- Not used
10 +24V2 I DC24V DC24V power input from Feed PWB
11 EXIT_FAN I DC0V/24V Front eject fan motor: On/Off
12 DU_ENTER_SEN
S
O DC0V/3.3V Duplex sensor 1: On/Off
YC16 1 DU1_B/ O DC0V/24V(pulse) Duplex motor 1 drive control signal
2 DU1_A/ O DC0V/24V(pulse) Duplex motor 1 drive control signal
3 DU1_B O DC0V/24V(pulse) Duplex motor 1 drive control signal
4 DU1_A O DC0V/24V(pulse) Duplex motor 1 drive control signal
5 EDGE_FAN_REM O DC0V/24V Right front eject fan motor 2: On/Off
6 +24V2 O DC24V DC24V power output to Right front eject
fan motor 2
7 EDGE_FAN_REM O DC0V/24V Right rear eject fan motor 2: On/Off
8 +24V2 O DC24V DC24V power output to Right rear eject
fan motor 2
Connec-
tor
Pin Signal I/O Voltage Description
To Next Page
Loading...
