Kyocera TASKalfa 8002i - Page 151

2NJ/2RK
2-102
Cassette heater non-installed model
Cassette heater installation requires the following parts:
120V
Cassette heater set
(302NJ9416_) 1pc
Bundle parts of cassette heater set(302NJ9416_)
Cassette heater 120(302RH4404_) 2 pcs
Connector cover 2pcs
High temperature caution label 2 pcs
Screws (M3x6 S-tite) 4 pcs
Screws (M4x8 with the binding head) 2 pcs
Wire saddles 8 pcs
220 to 240V
Cassette heater set
(302NJ9417_)1 pc
Bundle parts of cassette heater set(302NJ9417_)
Cassette heater 240(302RH4405_) 2 pcs
High temperature caution label 2 pcs
Connector cover 1pc
Screws (M3x6 S-tite) 4 pcs
Screws (M4x8 with the binding head) 1 pc
Wire saddles 9 pcs
Procedures
Cassette 1,2
1. Turn the power switch off and disconnect the power plug.
2. Pull out the lower cassette (a) from the main unit (b) and remove it in the direction of the arrow.
Figure 2-199
a
b