2WA/2NJ/2RK-1
8-101
YC6 8 GND - - Ground
9 SZSW2 I DC0V/3.3V DP lift lower limit sensor: On/Off
10 DEK_OPN1_3.3V
2
-- Not used
11 GND - - Ground
12 DEK_OPN1 I DC0V/3.3V PF deck sensor: On/Off
13 NC - - Not used
YC8 1 OUT2 O DC0V/24V(pulse) PF Lift motor control signal
2 OUT1 O DC0V/24V(pulse) PF Lift motor control signal
YC11 1 GND - - Ground
2 GND - - Ground
3 24V2 I DC24V DC24V power input
4 24V2 I DC24V DC24V power input
YC13 1 SDO O DC0V/
3.3V(pulse)
Communication data signal
2 SDI I DC0V/
3.3V(pulse)
Communication data signal
3 CLK I DC0V/
3.3V(pulse)
Communication clock signal
4 SEL I DC0V/3.3V Communication select signal
5 RDY O DC0V/3.3V Communication ready signal
6 PAUSE I DC0V/3.3V Communication pause signal
7 DEK_OPN1 O DC0V/3.3V Deck open/close signal output
8 DEK_OPN2 - - Not used
9 +3.3V4 O DC3.3V DC3.3V power input
10 GND - - Ground
11 SD_FINAL_SENS O DC0V/3.3V PF paper feed sensor: On/Off
12 PF_FINAL_SENS - - Not used
YC15 1 FDR_CL O DC0V/24V PF paper feed clutch: On/Off
2 +24V2_F1 O DC24V DC24V power output
YC18 1 FMOT_CH_A I DC0V/24V(pulse) PF paper feed motor control signal
2 FMOT_CH_B I DC0V/24V(pulse) PF paper feed motor control signal
3 3.3V O DC3.3V DC3.3V power output
Connec-
tor
Pin Signal I/O Voltage Description
To Next Page
Loading...
