2NJ/2RK
2-123
12. Connect the connector (b) of the heater outlet set (a) to the paper feeder side connector (c).
13. Attach the heater outlet set (a) with two screws (d)(M3×8).
Figure 2-232
14. Connect the side feeder (a) to the main unit side paper feeder (b) with the AC cord (c) and the connector wire (d).
Figure 2-233
15. Reattach the parts in the original position.
16. Turn the power on and set to [mode1/mode2] In maintenance mode U327 [Cassette heater control setting].
IMPORTANT
When connecting the cassette heater, do not unplug the power cord. (Power is supplied when the power is switched off)
a
b
c
d
d
b
a
c
d
To Next Page
Loading...
