Kyocera TASKalfa 8002i - Page 171

2NJ/2RK
2-122
8. Connect the connector (b) of cassette heater wire (a) to the connector (c) of the inlet cable.
9. Attach two wire saddles (d) and the edge saddles (e) and secure the wire.
10. Attach the right cover and the rear cover.
Figure 2-230
(Main unit side)
11. Remove two screws (a)(M3×8) and remove the cover plate (c) from the main unit side paper feeder (b).
Figure 2-231
d
e
c
b
a
c
b
a
a