2NJ/2RK-1
2-164
23. Connect the connector of the key counter wire (a)
to the connector (f) (YC38) of the engine PWB (e).
Figure 2-290
24. Release six wire saddles (a).
25. Pass the key counter wire (b) through six of the
wire saddle (a) and fix it.
26. Reattach the controller box in the original position.
27. Reattach the right rear cover in the original posi-
tion.
28. Reattach the left rear cover in the original position.
29. Reattach the controller cover in the original posi-
tion.
Figure 2-291
a
12j070a
c
a
b
YC38
To Next Page
Loading...
