Kyocera TASKalfa 8002i - Page 350

2WA/2NJ/2RK
4-22
3. Remove the stop ring A (a) and slide
the drive joint (b).
4. Slide the bushing A (c).
5. Remove the stop ring B (d) and remove
the bushing B (e).
Figure 4-21
6. Release the hook (b) of the feed holder
assembly (a).
7. Remove the spring (c) and feed holder
assembly (a) from the upper base (d).
Figure 4-22
a
b
c
d
e
a
b
c
d
e
b
d