2WA/2NJ/2RK-2
6-21
(49) Panel lock information F00: OFF
F01: Partial lock1
F02: Partial lock2
F03: Partial lock3
F04: Full lock
(50) USB information U00: Not Connected
U01: Full speed
U02: Hi speed
(51) Paper handling information 0: Paper source select
1: Paper source fixed
(52) Auto cassette change 0: OFF
1: ON (Default)
(53) Black and white printing double count
mode
0: All single counts
3: Folio (Less than 330 mm length), Single counts
(54) Billing counts timing 0: When secondary paper feed starts
1: When the paper is ejected
(55) Temperature (machine inside) -
(56) Temperature (machine outside) -
(57) Relative humidity (machine outside) -
(58) Absolute humidity (machine outside) -
(59) Machine inside humidity
(60) Asset Number -
(61) Job end judgment time-out time -
(62) Job end detection mode 0: Detects as one job, even if contained multiple jobs
1: Detects as individual job, dividing multiple jobs at a
break in job
(63) Prescribe environment reset 0: Off
1: On
(64) Media type attributes
1 to 28 (Not used: 18, 19, 20)
For details on settings, Refer to MDAT
command in "Prescribe Commands
Refer ence Manual".
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1
5: Heavy 2 Duplex settings
6: Heavy 3 0: Disable
7: Heavy 4 1: Enable
8: Heavy 5
9: Extra Heavy
(65) IO Calibration information K
(66) Bias Calibration information -
(67) Sensor initial information -
(68) Calibration information -
(69) Calibration information -
No. Items Contents
To Next Page
Loading...
