2WA/2NJ/2RK-2
6-22
(70) Calibration information -
(71) Calibration information -
(72) Calibration information -
(73) Paper loop correction shift amount -
(74) Paper loop correction interval -
(75) Paper loop correction patch amount -
(76) Calibration information -
(77) Calibration information -
(78) RFID information (K) -
(79) RFID reader/writer version -
(80) Optional paper feeder firmware ver-
sion
-
(81) Software version of option language
(82) Maintenance information -
(83) Data sanitization information FAX Board/Main Memory/Panel Memory/SSD/Executed
time
1: Success
0: Fail
-: Not performed or Not installed
(84) Toner low setting 0: Disabled
1: Enabled
(85) Toner low detection level 0 to 100 (%)
(86) Shift regulation for a single original 0: disable (shift regulation off)
1: enable (shift regulation on)
(87) banner print affirmation displays to set. 0: No display
1: Display every page
(88) ErP applied mode setting 0: ErP non-applied mode
1: ErP applied mode
(89) Full-page print mode 0: Normal mode (Factory setting)
1: Full-page mode
(90) Wake-up mode 0: Off (Don't wake up)
1: On (Do wake up)
(91) Drum serial number Black
(92) Developer serial number Black
No. Items Contents
To Next Page
Loading...
