Kyocera TASKalfa 8002i

2WA/2NJ/2RK
6-23
Contents
Exits the maintenance mode and returns to the normal copy mode.
Purpose
Exit the maintenance mode.
Method
1.Press the [Start] key.
2.The normal copy mode is entered.
Contents
Sets the machine initial setting values to the factory default.
Purpose
Executes the machine initial settings when shipping from factory.
Method
1.Press the [Start] key.
2.Select [Mode1(All)].
3.Press the [Start] key.
4.Turn the power switch off.
* :An error code is displayed in case of the initialization error.
When errors occur, turn the power switch off then on, and execute initialization using mainte-
nance mode U002.
Wait more than 5 seconds between the power off and on.
Error codes
U001 Exiting the maintenance mode
(Message:Exit Maintenance Mode)
U002 Set Factory Default
(Message: Set Factory Default)
Items Contents
Mode1(All) Sets the machine initial setting values to the factory default.
Codes Contents
0001 Controller (Entity error)
0002 Controller (Counter error)
0003 Controller (OS error)
0020 Engine error
0040 Scanner error