2WA/2NJ/2RK
6-35
Contents
Displays the on/off status of each switch and sensor to detect paper on the paper conveying
path.
Purpose
Execute to check the conveying switches and sensors are operating correctly.
Method
1.Press the [Start] key.
2.Check the switches and sensors by manually turning them on/off.
* :The switch indication is inversed when the switch is detected.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U031 Check the conveying switch
(Message: Check Conveying Switch)
Items Contents
MPT Jam Displays the switching status of the MP feed sensor
Casstte1 Feed Displays the switching status of the feed sensor 1
Casstte2 Feed Displays the switching status of the feed sensor 2
Feed2(Feed B) Displays the switching status of the conveying sensor
Regist Displays the switching status of the registration sensor
Belt Jam Indicates the switching status of the loop sensor
Exit Feed Displays the switching status of the eject sensor
DU1 Displays the switching status of the duplex sensor 1
DU2 Displays the switching status of the duplex sensor 2
Bridge1 Feed Displays the switching status of the bridge conveying sensor 1
Bridge2 Feed Displays the switching status of the bridge conveying sensor 2
Bridge Exit Displays the switching status of the bridge eject sensor
Exit Paper Displays the switching status of the eject reverse sensor
Fuser Feed Displays the switching status of the fuser sensor
Feed1(Mid) Displays the switching status of the middle sensor
Exit Job Separator Displays the switching status of the JS exit sensor
Decal HP Displays the switching status of the BR decurler sensor
To Next Page
Loading...
