Kyocera TASKalfa 8002i

2WA/2NJ/2RK
6-34
Contents
Drive each motor.
Contents
Execute to check each motor's operation.
Method
1.Press the [Start] key.
2.Select the motor to operate.
3.Press the [Start] key.
* :Each operation starts.
* :To stop the operation, press the [Stop] key.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U030 Motor operation check
(Message: Check Motor Operation)
Items Contents
Feed Operate the paper feed motor
DLP(K) Operate the the developer BK/belt motor
Fuser Operate the fuser motor
SB(CW) Operate the eject motor(CW)
SB(CCW) Operate the eject motor(CCW)
Job Separator Operate the JS eject motor
Regist Operate the registration motor
Decal Operate BR decurler motor
Decal Guide Operate the BR guide motor
Bridge1 Operate the BR conveying motor 1
Bridge2 Operate the BR conveying motor 2
IH Core Operate the IH Core motor
Fuser Release Operate the fuser release motor
DU1 Operate the duplex motor 1
DU2 Operate the duplex motor 2
Mid Roller Operate the middle motor
Vibration Operate the vibration motor
Exit(CW) Operate the exit motor(CW)
Exit(CCW) Operate the exit motor(CCW)
V Feed Operate the vertical conveying motor