Kyocera TASKalfa 8002i

2WA/2NJ/2RK
6-33
Contents
Execute to retrieve backup data after replacing the main PWB.
Purpose
Restores the setting values backup from the HDD to the flash memory on the main PWB.
Data is transferred from an SSD to another via a USB memory.
Execution
1.Press the [Start] key.
2.Select the item to execute.
Method:Flash
1.Select [Restore].
2.Press the [Start] key.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Method:SSD
1.Select the item to execute.
2.Press the [Start] key.
3.After [Restore] completion, turn the power switch off/on. Wait more than 5 seconds between
the power off and on.
* :Indicates "NG" when completing abnormally.
Saved data:
U278 Delivery date setting
U402 margin adjustment
U952 Maintenance workflow data
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U026 Retrieve the backup data
(Message: Pulling Backup Data)
Items Contents
Flash Updates the firmware
SSD SSD data is backed up and retrieved when a USB memory is installed.
Items Contents
Restore Restore the backup data
Items Contents
Backup Backup the SSD data
Restore Restore the backup data