2WA/2NJ/2RK-1
6-60
Adjustment: Main Scan(CIS)
1.Change the setting value by using [+] [-] key or the numeric keypad.
Copy example 1: increase the setting value.
Copy example 2: decrease the setting value.
* :When the setting value is increased, the image widens, when the setting value is
decreased, it narrows.
Figure 6-12
2.Press the [Start] key and then fix the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Original Copy
example 1
Copy
example 2
To Next Page
Loading...
