2WA/2NJ/2RK
6-62
Adjustment: Front Tail/CIS Tail
1.Change the setting value by using [+] [-] key or the numeric keypad.
For the copy example 1, increase the value.
For the copy example 2, decrease the value.
* :When the setting value is increased, the image get longer, and it shortens when the setting
value is decreased.
Figure 6-14
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Copy
example 1
Original
Copy
example 2
To Next Page
Loading...
