Kyocera TASKalfa 8002i

2WA/2NJ/2RK
6-65
Execution: Home Position
1.Select [Home Position].
2.Press the [Start] key.
* :The scanner mirror frame moves to the Home Position.
Execution: Dust Check
1.Select [Dust Check].
2.Press the [Start] key.
* :Lamps are lighted.
3.Press the [Stop] key to turn the lamp off.
Execution: DP Reading
1.Select [DP Reading].
2.Press the [Start] key.
* :The scanner mirror frame moves to the scanning position.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Description
Sets the density correction at scanning the original from the document processor.
Purpose
Changes the setting value at background image occurrence when scanning bluish original and
originals with slightly thick background are scanned. Adjusts when there is the image difference
between the table scanning and DP scanning. CIS scanning is not corrected.
Setting
1.Press the [Start] key.
2.Select the item to set.
3.Change the setting value by using [+] [-] key or the numeric keypad.
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U074 Adjusting the DP input characteristics
(Message: Adjust DP Input)
Items Contents Setting range Initial
setting
Coefficient Density correction at DP image scanning 0: No correction
1: Low-level
correction
2: Middle-level
correction
3: High-level
correction
1
DP Color
Regist
Operation approval setting of the DP color registra-
tion correction
1: On
2: Off
1