2WA/2NJ/2RK
6-67
Contents
Select and output the MIP-PG pattern generated by the main unit.
Purpose
When adjusting the image scanning items, execute to check the machine status except the scan-
ner section using the MIP-PG pattern output without image scanning process.
* :Test sample which is output in the maintenance mode is not counted both coverage rate and
the number of sheet in the print coverage on service status page.
Execution
1.Press the [Start] key.
2.Select the MIP-PG pattern to output
3.Press the [System Menu] key.
4.Press the [Start] key to output a MIP-PG pattern.
5.Press the [System Menu] key.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U089 MIP-PG pattern output
(Message: Output MIP-PG Pattern)
Display Output contents Purpose
Gray scale Gray scale pattern PG Check the gradation repro-
ducibility
Mono 1 PG for gray confirmation(Density:0) Check the drum quality
Mono 4 PG for gray confirmation(Den-
sity:7.0)
Check the drum quality
256Gradation 256 steps PG Check the gradation repro-
ducibility
Sample Set Gray scale pattern PG
PG for gray confirmation(Den-
sity:7.0)
Outputs patterns for the long
life unit warranty application
To Next Page
Loading...
