Kyocera TASKalfa 8002i

2WA/2NJ/2RK-1
6-75
Contents
Set the primary transfer control voltage
Purpose
Change setting if a failure such as faint image, etc. occurs.
Setting
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Surround Correct
1.Select the item to set.
* :Initial value setting: 0 (Off)
2.Press the [Start] key and then fix the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U101 Primary transfer voltage adjustment
(Message: Adjust 1st Transfer Voltage Output)
Items Contents
Surround Correct Setting the environmental correction
Items Contents
On Prohibitive setting of the primary transfer feedback environmental cor-
rection On (1)
Off Prohibitive setting of the primary transfer feedback environmental cor-
rection: Off (0)