Kyocera TASKalfa 8002i - Page 671

2WA/2NJ/2RK-2
6-78
Setting: 2nd
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key and then fix the setting value.
Setting: Heavy1- 3
1.Select the item to set.
* :The screen for setting is displayed.
Setting: 1st Half
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Width=105 Setting that paper width is equal to 105 0 to 255 1 151 144 135
Width=210 Setting that paper width is equal to 210 0 to 255 1 139 133 126
Width=297 Setting that paper width is equal to 297 0 to 255 1 125 121 114
Items Contents
1st Half 1st side transfer control value at half speed
2nd Half 2nd side transfer control value at half speed
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Width=105 Setting that paper width is equal to 105 0 to 255 1 114 114 109
Width=210 Setting that paper width is equal to 210 0 to 255 1 114 114 109
Width=297 Setting that paper width is equal to 297 0 to 255 1 110 110 106