Kyocera TASKalfa 8002i - Page 670

2WA/2NJ/2RK-2
6-77
Setting: 2nd
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Execution: Normal2/3
1.Select the item to set.
* :The screen for setting is displayed.
Setting: 1st
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key and then fix the setting value.
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Width=105 Setting that paper width is equal to 105 0 to 255 1 151 144 135
Width=210 Setting that paper width is equal to 210 0 to 255 1 139 133 126
Width=297 Setting that paper width is equal to 297 0 to 255 1 125 121 114
Items Contents
1st Surface transfer control value at full speed
2nd Back side transfer control value at full speed
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Width=105 Setting that paper width is equal to 105 0 to 255 1 162 154 143
Width=210 Setting that paper width is equal to 210 0 to 255 1 158 150 140
Width=297 Setting that paper width is equal to 297 0 to 255 1 149 142 133