2WA/2NJ/2RK
6-110
Contents
Adjusts touch panel detecting positions.
Purpose
Correct and confirm the touch panel detecting positions, when the panel PWB or the operation
panel is replaced or if the detecting positions are not aligned.
* :When it is not possible to press the soft keypad and not possible to enter in the maintenance
mode as the touch panel positioning adjustment is not aligned, U201 is started up with three
operation panel keys([Home]+[Stop]+[Reset]) press continuing three seconds.
Execution
1.Press the [Start] key.
2.Select the item to execute.
3.Press the [Start] key.
* :The screen for executing is displayed.
Method: Initialize
* :Do not touch the touch panel.
U201 Initializing the touch panel
(Message: Initialize Touch Panel)
Items Contents
Initialize Automatically corrects the touch panel display position
Check Checks the touch panel display position
Maintenance Mode
Maintenance Mode Active U201
Initialize Touch Panel
Initialize
Check
Please do not touch a operation panel.
To Next Page
Loading...
