Kyocera TASKalfa 8002i - Page 716

2WA/2NJ/2RK
6-123
Description
Changes the image data and the message of the opening screen at the machine startup and
theimage data and the message of the service call screen to user specified data.
Purpose
Change the setting according to the user's request
Setting
1.Write the image data or the message data to the USB memory.
2.Insert a USB memory into the USB memory slot.
3.Turn the power switch on.
4.Press the [Start] key.
5.Select the item to set.
6.Select the item to set.
7.Press the [Start] key.
* :Installation or uninstallation is started.
8.When normally completed, [OK] is displayed.
Supplement 1: File information
U224 Setting Original Panel Display
(Message: Install Original Panel Display)
Items Contents
Install Installs the image data or the message data
UnInstall Restores the original image data or message data
Operation item Partial Lock 1 Lock
Opening Img Startup screen Entire start display
Call Img Service call screen Graphic display area
Home Menu Img Home Menu background Home Menu display area
Call Msg Top Service call message 1 Message display area (top)
Call Msg Detail Service call message 2 Message display area (descriptive
area)
Description File name Image size (Pixels) File format
Startup screen opening_ext_image.png
Length: 480
Width : 800
PNG
Service call screen
callwin_ext_image.png
Length: 200
Width : 180
PNG
Home Menu
screen
menu_background.png
Length: 480
Width : 800
PNG
Service call
message 1
callwin_ext_mes_top.txt -
TEXT
(Unicode)
Service call
message 2
callwin_ext_mes_detail.txt -
TEXT
(Unicode)