2WA/2NJ/2RK
6-219
Contents
Sets the FAX communication.
Purpose
Reducing the error communication when using a low quality line
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: V.34
Sets whether to enable/disable the V.34 communication individually for transmission and recep-
tion.
1.Select the item to set.
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Setting: V.34-3429Hz
Sets if the V.34 symbol speed 3429 Hz is used.
1.Select the item to set.
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
U633 Communication control 4
(Message: Communication Control 4)
Items Contents
V.34 Enables or disables the V.34 communication.
V.34-3429Hz Sets the V.34 symbol speed (3429 Hz).
DIS 2Res Sets the number of times of DIS signal reception.
RTN Check Sets the Refer ence for the RTN signal output.
Items Contents
On V.34 communication is enabled for both transmission and reception.
TX V.34 communication is enabled for transmission only.
RX V.34 communication is enabled for reception only.
Off V.34 communication is disabled for both transmission and reception.
Items Contents
On V.34 symbol speed 3429 Hz is used.
Off V.34 symbol speed 3429 Hz is not used.
To Next Page
Loading...
