2WA/2NJ/2RK
6-220
Setting: DIS 2Res
Sets the number of times to receive the DIS signal to once or twice. Execute it as one of the cor-
rective measures for transmission errors and other problems.
1.Select the item to set.
* :Initial setting: Once
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Setting: RTN Check
Sets the error line rate to be a Refer ence to the RTN signal transmission. If transmission errors
occur frequently due to the line quality, lower this setting to reduce them.
1.Select the item to set.
* :Initial setting: 15%
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents
Once Responds to the first signal.
Twice Responds to the second signal.
Items Contents
5% Error line rate of 5%
10% Error line rate of 10%
15% Error line rate of 15%
20% Error line rate of 20%
To Next Page
Loading...
