2WA/2NJ/2RK
6-222
Contents
Sets the detection time when one-shot detection is selected for remote switching.
Sets the detection time when continuous detection is selected for remote switching.
Purpose
Sets the remote switching conditions according to the user's telephone type, pRefer ence, etc.
Method
1.Press the [Start] key.
2.Select the item to set.
3.Change the setting value by using [+] [-] key or the numeric keypad.
4.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U640 Communication time setting 1
(Message: Communication Time 1)
Items Contents Setting
range
Initial
setting
Time(One) Sets the one-shot detection time for
remote switching.
0 to 255 7
1 (New Zealand)
Time (Cont) Sets the continuous detection time for
remote switching.
0 to 255 80
To Next Page
Loading...
