Kyocera TASKalfa 8002i - Page 819

2WA/2NJ/2RK
6-226
Contents
Sets the G3 cable equalizer. Sets the modem detection level.
Purpose
Adjusts the equalizer to be compatible with the line characteristics
Set to Improve the accuracy of communication when using a low quality line
Method
1.Press the [Start] key.
2.Select the item to set.
Setting: Reg G3 TX Eqr
1.Select [0dB], [4dB], [8dB] or [12dB].
* :Initial setting: 0dB
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Setting: Reg G3 RX Eqr
1.Select [0dB], [4dB], [8dB] or [12dB].
* :Initial setting: 0dB
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Setting: RX Mdm Level
1.Select [-33dBm], [-38dBm], [-43dBm] or [-48dBm].
* :Initial setting: -43dBm
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U650 Modem 1
(Message: Modem 1)
Items Contents
Reg G3 TX Eqr Sets the G3 transmission cable equalizer.
Reg G3 RX Eqr Sets the G3 reception cable equalizer.
RX Mdm Level Sets the modem detection level.