2WA/2NJ/2RK
6-228
Contents
Sets the NCU (network control unit).
Purpose
Execute as required
Execution
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Exchange
Selects if the FAX is connected to either a PBX or public switched telephone network.
1.Select the item to set.
* :Initial setting: PSTN
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Setting: Dial Tone
Selects whether or not to check for a dial tone to check if the telephone is off the hook when a fax
is connected to a public switched telephone network.
1.Select the item to set.
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
U660 Ring setting
(Message: Set Calls)
Items Contents
Exchange Setting the PBX/PSTN connection
Dial Tone Sets the PSTN dial tone detection.
Busy Tone Sets the busy tone detection.
PBX Setting Setting the PBX connection
DC Loop Sets the loop current detection before dialing.
Items Contents
PSTN Connected to the public switched telephone network.
PBX Connecting to the PBX
Items Contents
On The dial tone is detected.
Off The dial tone is not detected.
To Next Page
Loading...
