2WA/2NJ/2RK
6-233
Contents
Sets the port applicable to the maintenance mode.
Purpose
Sets the maintenance mode target port when installing multiple ports .
Setting is unnecessary if the same contents are set for both ports. Sets only when different items
are set for each port.
* :This maintenance mode only appears when the multiple ports are installed.
Setting
1.Press the [Start] key.
2.Press [Port Select].
* :Current setting display is inverted.
3.Select the item to set.
4.Press the [Start] key to set the setting value.
Precautions
These contents to set are cleared when exiting the maintenance mode or turning the power off
and the settings are necessary when entering the maintenance mode.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U698 Setting the maintenance port
(Message: Set Port for Maintenance)
Items Contents
ALL All ports
PORT 1 Port 1 (FAX PWB port)
PORT 2 Port 2 (Optional multiple port)
To Next Page
Loading...
