2WA/2NJ/2RK
6-234
Contents
Sets the software switches on the FAX PWB individually.
Purpose
Change the setting when a problem such as split output of received originals occurs
* :Since the communication performance is largely affected, normally this setting need not be
changed.
Method
1.Press the [Start] key.
2.Select [SW No.].
3.Enter the desired software switch number (3 digits) using the numeric keys and press the
[Start] key.
4.Press the keys of bit 0 to 7 to switch each bit between 0 and 1.
5.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
List of software switches which can be configured
Communication control procedures
U699 Software switch: Set
(Message: Set: Soft SW)
Items Contents
SW No. Specifies the software switch number (2 to 3 digits)
Items Contents
Bit
Set the software switch bit (8bit).
No. Bit Contents
36 7654 Coding format in transmission
3210 Coding format in reception
37 5 33600bps/V34
4 31200bps/V34
3 28800bps/V34
2 26400bps/V34
1 24000bps/V34
0 21600bps/V34
38 7 19200bps/V34
6 16800bps/V34
5 14400bps/V34
4 12000bps/V34
3 9600bps/V34
2 7200bps/V34
1 4800bps/V34
To Next Page
Loading...
