2WA/2NJ/2RK
6-251
Contents
Adjust the paper loop amount when using the document processor.
Purpose
Execute when original no-feed jam, skew or creases on the original appears.
Method
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original on the DP and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
5.Select the item to adjust.
6.By using the [+] [-] keys or the numeric keys, change the setting value.
* :When the setting value is increased, the paper loop amount increase, and it decreases
when the setting value is decreased.
Increase the set value if no feed jam or skew feed occurs and reduce the set value if creases
appear on the original.
7.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U942 DP loop amount setting
(Message: Adjust DP Original Loop Amount)
Items Contents Setting range Data
variation
Initial
setting
Front Single-side original loop amount -32 to 32 0.18mm 0
Mix Mixed original loop amount -32 to 32 0.18mm 0
To Next Page
Loading...
