2WA/2NJ/2RK
6-252
Contents
Execute the maintenance items in the order of registration in the main unit or the USB memory.
Purpose
Execute to register regular maintenance items.
Method
1.Press the [Start] key.
2.Select the item to execute.
* :The screen for executing is displayed.
Method: Continue
1.Select maintenance item number to execute.
2.Press the [Start] key.
* :Selected maintenance mode is executed.
Method: Execute(USB)
1.Check the LED display is off and turn the power switch off.
2.Insert a USB memory into the USB memory slot.
3.Turn the power switch on.
4.Enter maintenance item U952.
5.Select [Execute(USB)].
6.Select [workflow].
7.Press the [Start] key.
* :Execute the maintenance items in the order of registration in the workflow.
Method: Execute
1.Select the place to save the data to execute.
2.Select the item to execute.
3.Press the [Start] key to start the processing.
* :The below work flow is preset at a shipment of the main unit.
U952 Maintenance mode work flow
(Message: Maintenance Mode Work Flow)
Items Contents
Continue Resume interrupted work flow.
Execute(USB) Executes the work flow in a USB memory.
Execute Execute the work flow saved in the main unit.
Entry(USB) Executes the work flow in a USB memory.
Entry Register the work flow in the main unit manually.
Log Displays the latest work flow execution history.
Items Contents
WorkFlowData 01 - 07 Workflow data in a USB memory
Items Contents
Data 1 - 8 Work flow save area in the main unit
To Next Page
Loading...
