2WA/2NJ/2RK
7-102
J0211/J0212/J0214: PF conveying cover / PF top cover open detection (Side multi
feeder), PF conveying cover open detection (Paper feeder / Large capacity feeder)
Object: Side multi feeder + Paper feeder, or Side multi feeder + Large capacity feeder
The PF conveying cover open / PF top cover open is detected during paper feed from the side multi feeder.
Or, the PF conveying cover open is detected during paper feed from the paper feeder / large capacity feeder.
J0213: Side feeder release detection
Object: Side feeder
Detected the side feeder release during printing.
Step Check description Assumed cause Measures Reference
1 Checking the cover The covers are not fitted. Check if the cover is securely
closed and reinstall it if nec-
essary. If the cover is
deformed, repair or replace
it.(J0211: PF conveying cover
(Side multi feeder), J0212:
PF top cover (Side multi
feeder), J0214: PF conveying
cover (Paper feeder / Large
capacity feeder))
2 Checking the switch The switch does not prop-
erly operate.
Reattach the switch and
reconnect the connector. If
not repaired, replace it.
(J0211: PF conveying cover
switch (Side multi feeder),
J0212: PF top cover switch
(Side multi feeder), J0214:
PF conveying cover switch
(Paper feeder / Large capac-
ity feeder))
Step Check description Assumed cause Measures Reference
1 Checking the side feeder The Side Feeder is not
engaged with the main
unit.
Check if the side feeder is
securely installed and rein-
stall it if necessary. And if the
exterior cover of the side
feeder is deformed, repair or
replace it.
2 Checking the PF connec-
tion switch
The PF connection switch
does not properly operate.
Reattach the PF connection
switch and reinsert the con-
nector. If not repaired,
replace it.
To Next Page
Loading...
