Care and maintenance
Operating Manual 7.1 Rev.: 18.06.2008 111
6. Care and maintenance
The ProtoMat
®
S62 requires little care and is extremly maintenance-free.
In order to ensure safe and reliable operation of the ProtoMat
®
S62, implicitly observe the infor-
mation about caring and ensure that the necessary maintenance work is carried out at within
the listed intervals.
6.1 Caring/inspecting
Cleaning the surfaces
1. If required, clean the housing surfaces using a dry, antistatic cloth.
2. Remove dust and material residues with a soft brush or a mois-
tened cloth.
[]
Carrying out a visual inspection
1. Prior to every use, carry out a visual inspection to check the
ProtoMat
®
S62 and all connecting cables for damage.
2. If you notice damage, have it made good by a professional prior to
next use. If necessary, contact the LPKF Support. Make sure that
the ProtoMat
®
S62 can not be used until the damage has been
repaired.
WARNING
Health hazard due to particulate matter!
The processing of materials can give rise to dusts hazardous to
your health.
› Extract the dust and material residues or remove them with a
brush or moistened cloth;
DO NOT blow it out.
To Next Page
Loading...
