Manual tasks and settings
Operating Manual 7.1 Rev.: 18.06.2008 47
4. Manual tasks and settings
This chapter contains essential information about manual operation of the ProtoMat
®
S62. You
will find detailed information about the automatic control and operation of the LPKF BoardMas-
ter software in the BoardMaster manual. Observe the safety instructions and follow the guid-
ances step by step in order to achieve the desired result.
Y
4.1 Switching on the system
To avoid unnecessary error messages you always should switch on the
system in the specified order.
In the following we assume that the computer is switched on and the
operating system has been started.
Note: If your ProtoMat
®
S62 is equipped with different dust extraction, familiar-
ise yourself with the relevant information on setting options.
WARNING
Risk of injury!
When opened, the cover of the acoustic cabinet can drop down
due to impact shocks or vibrations. This can result in limbs being
broken or crushed.
› When opening the cover of the acoustic cabinet make sure that
it engages in the uppermost position and cannot drop down as
a result of vibrations or the influence of third parties.
To Next Page
Loading...
