Information about this document
Operating Manual 7.1 Rev.: 18.06.2008 3
Information about this document
This manual contains important information regarding operation, care
and maintenance of the LPKF circuit board plotter ProtoMat
®
S62. The
manual is directed at persons with basic knowledge in the installation and
operation of software-controlled machines. Knowledge regarding the
safety and behavior in workshops as well as regarding the operation of a
computer with Windows 2000/XP are required.
Availability
When working at or with the ProtoMat
®
S62, this document must be
available in complete and legible condition. It must be within easy reach
near the machine for all the persons entrusted with work on the machine.
As the machine owner, you have to make sure that the machine is only
operated by persons who have read and understood this manual or have
been informed about its contents.
Notations
Different notations enable better orientation in this document.
Symbols and signal words
→ An arrow points to a different location in this document or to another
document specified by name.
WARNING
Danger to life or health.
This symbol indicates a dangerous situation in which in case of
non-observance of the information there is a risk to life or health.
› Informations to avoid the danger are given.
CAUTION
Risk of material damage.
› This symbol indicates a situation which in case of non-observ-
ance of the information can result in material damage.
› Informations to avoid the risks are given.
Tip: The hand indicates tips for easier handling, material use and/or
further processing.
To Next Page
Loading...
