Automatic operation
46 ProtoMat
®
S62
3.7.3 Data selection
Production only ever runs with the data you have activated.
You can use the selection functions to activate all data or select and acti-
vate subsections, individual lines or even individual segments of a line.
It is also possible to restrict the selection to one or more tools within a
production phase. Thus, for example, you can start by drilling only holes
with a selected diameter or cutting milling tracks with a certain width.
The data must be selected and reactivated for each production phase. If
no data is activated, BoardMaster considers the selected production
phase at the start as completed and no processing will be executed.
To Next Page
Loading...
