LPKF ProtoMat S62 - 11 EC Declaration of Conformity

EC Declaration of Conformity
Operating Manual 7.1 Rev.: 18.06.2008 149
11. EC Declaration of Conformity
Declaration of Conformity in accordance with Machinery
Directive 98/37/EC, Appendix II A
The manufacturer/seller
hereby declares that the circuit board plotter
ProtoMat
®
S62
conforms to the provisions of the directive(s) identified above - including
the modifications effective at the time of this declaration.
Any modifications made to the machine without the manufacturer's
authorisation shall invalidate the declaration for this unit.
We maintain a quality assurance system according to ISO 9001 that has
been certified by the BVQI. Accordingly, our development and production
processes comply with the following EC directives and EN standards:
Applied harmonised standards
• EN 292-1:1991
Safety of machinery - Basic concepts, general principles for design -
Part 1: Basic terminology, methodology
• EN 292-2:1991+A1:1995
Safety of machinery - Basic concepts, general principles for design -
Part 2: Technical principles and specifications
• EN 349:1993
Safety of machinery - Minimum gaps to avoid crushing of body parts
• EN 1050:1996
Safety of machinery - Principles for risk assessment
• EN 626-1:1994
Safety of machinery - Reduction of risks to health from hazardous
substances emitted by machinery - Part 1: Principles and specifica-
tions for machinery manufacturers
• EN 60204-1:1997
Safety of machinery - Electrical equipment of machines - Part 1: Gen-
eral requirements
LPKF Laser & Electronics AG
Osterriede 7
30827 Garbsen
Germany