For your safety
Operating Manual 7.1 Rev.: 18.06.2008 17
1.2 Safety instructions
WARNING
Risk of death by electric shock!
Missing or insufficient electrical fuse protection can result in fatal
electric shocks and/or fire.
› Use only fuses of type T4L 250 V.
› Fuse holders must
NEVER be bridged.
WARNING
Risk of injury caused by pointed/sharp tools!
Improper use can cause cuts and stab injuries.
› Handle tools carefully and keep them in the tool box when not in
use.
WARNING
Risk of injury!
When opened, the cover of the acoustic cabinet can drop down
due to impact shocks or vibrations. This can result in limbs being
broken or crushed.
› When opening the cover of the acoustic cabinet make sure that
it engages in the uppermost position and cannot drop down as
a result of vibrations or the influence of third parties.
WARNING
Dusts and gases are hazardous to your health!
The processing of the materials can give rise to dusts and gases
hazardous to your health.
› Ensure that the dust extraction is switched on when processing
materials. Extract the dust and material residues or remove
them with a brush or moistened cloth; do
NOT blow com-
pressed air through.
CAUTION
Material damage due to incorrect tool positioning!
The milling/drilling head, spindle and the tool can become dam-
aged if the tool positions indicated in BoardMaster do not corre-
spond to the actual fitting of the circuit board plotter.
› Ensure that the settings in the Tool Status window corresponds
to the actual fitting of the circuit board plotter.
General safety instructions
› Read the installation instructions/operating manual before
operating the machine. In case of uncertainties ask a person
qualified in the art or contact LPKF Support.
› Use the machine only in accordance with its proper use.
› Never operate the machine in environments subject to fire or
explosion hazards.
› Operate the machine only in a suitable environment.
(Page 1 of 3)
To Next Page
Loading...
