Safety instructions
18 ProtoMat
®
S62
› Protect the machine against direct sunlight, humidity and fly-
ing sparks.
› Operate the machine only with accessories approved by LPKF
and use only original LPKF tools.
› Use the machine only in perfect condition. Prior to each use,
perform a visual inspection. Look out in particular for dam-
aged cables and hoses.
› Make sure that the safety devices are in perfect working order.
It is prohibited to ignore and bridge safety devices or to render
them inoperable.
› Make sure that there is no risk of stumbling caused by cables
and hoses.
› Have the machine operated, serviced and repaired by suffi-
ciently qualified and authorised personnel only.
› Repairs must only be carried out by qualified LPKF personnel
or following consultation with LPKF Support.
› Keep children away from the work area.
› Do not eat, drink or smoke in the workshop/work area.
› Observe the general and legal regulations for accident preven-
tion and environmental protection.
› You must wear the prescribed protective equipment at all
times when operating, servicing and repairing the machine.
› When handling the circuit board plotter, make sure that the
machine cannot start (unintentionally) or be operated by third
parties, for example via the computer.
› Unplug the machine from the mains prior to commencing any
maintenance work.
› Regular care and maintenance are essential.
General safety instructions (Continuation)
(Page 2 of 3)
To Next Page
Loading...
