Manual tasks and settings
Operating Manual 7.1 Rev.: 18.06.2008 55
Title bar The title bar shows the program name, the circuit board plotter used as
well as the name of any loaded or newly created job.
Main menu The menu bar lists all available menus.
Function bar The function bar shows the functions used for manual control of the cir-
cuit board plotter and for starting automatic machining processes.
Tool holder/magazine The tool magazine indicates the individual tool holders. If the tools have
been defined in the tool holders, each tool type is indicated in colour.
Current position of the
milling/drilling head
The blue cross-hair shows the current position of the milling/drilling head.
Mirror axis Mirror axis of the work area. The base material should be positioned in
the centre of the mirror axis.
Mouse pointer co-ordi-
nates
The current X and Y co-ordinates of the mouse pointer referenced to the
HOME position.
Status bar The status bar provides information about the functions of buttons, dis-
plays or areas where the cursor is currently located.
Camera image application
window (optional)
The Camera image application window will only appear if the
VisionSystem has been installed. The window displays the area moni-
tored by the camera. Please note that this area does not correspond to
the current position of the milling/drilling spindle.
Note: Detailed information about the functions of the individual operating
elements can be found in the BoardMaster manual.
To Next Page
Loading...
