Navistar INTERNATIONAL DT 466 Service Manual

ENGINE ELECTRICAL 307
Figure 452 Disconnecting the ECT sensor
3. Disconnect the wiring harness connector from the
ECT sensor.
Figure 453 Disconnecting the EBP sensor
4. Disconnect the wiring harness connector from the
EBP sensor.
Figure 454 Disconnecting the EGR control valve
connector
5. Disconnect the wiring harness connector from the
EGR control valve.
Figure 455 Disconnecting the EOT sensor
6. Disconnect the wiring harness connector from the
EOT sensor.
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.

Navistar INTERNATIONAL DT 466 Specifications

General

Brand	Navistar
Model	INTERNATIONAL DT 466
Category	Engine
Language	English