308 ENGINE ELECTRICAL
Figure 456 Disconnecting the MAP sensor
7. Disconnect the wiring harness connector from the
MAP sensor.
Figure 457 Disconnecting the MAT sensor
8. Disconnect the wiring harness connector from the
MAT sensor.
Figure 458 Disconnecting the IPR valve
connector
9. Disconnect wiring harness connector from the IPR
valve.
Figure 459 Disconnecting the EOP sensor
10. Disconnect the wiring harness connector from the
EOP sensor.
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.