332 ENGINE ELECTRICAL
Figure 514 Connecting to the EOT sensor
23. Connect the wiring harness connector to the EOT
sensor.
Figure 515 Connecting to the EGR control valve
24. Connect the wiring harness connector at the EGR
control valve.
Figure 516 Connecting to the EBP sensor
25. Connect the wiring harness connector to the EBP
sensor.
Figure 517 Connecting to the CMP sensor
26. Connect the wiring harness connector to the CMP
sensor.
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
