ENGINE ELECTRICAL 331
Figure 510 Connecting to the EOP sensor
19. Connect the wiring harness connector to the EOP
sensor.
Figure 511 Connecting to the IPR valve
20. Connect wiring harness connector to the IPR
valve solenoid.
Figure 512 Connecting to the MAT sensor
21. Connect the wiring harness connector to the MAT
sensor.
Figure 513 Connecting the MAP sensor
22. Connect the wiring harness connector to the MAP
sensor.
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
