330 ENGINE ELECTRICAL
Figure 506 Connecting to the WIF sensor
15. Connect the wiring harness at the WIF sensor.
Figure 507 Connecting to the fuel pressure
sensor
16. Connect the wiring harness to the fuel pressure
sensor (optional).
Figure 508 Connecting to the fuel heater
17. Connect the wiring harness at the fuel heater
(optional).
Figure 509 Connecting to the block heater
18. Install the block heater cable connections
(optional).
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
